MEGATURN NEXUS 900 Vertical Turning Center designed for versatility. The machine is designed to efficiently machine large workpieces – the maximum machining diameter: Ø920mm. x 800mm. Additionally, the optional Automatic Tool Changer eliminates interference with long boring bars mounted in adjacent turret station for extremely convenient tool setup. By increasing the number of tools that can be stored, permanent set tooling can be used that meets the requirements of a wide variety of workpieces. The 30 kW (40HP) spindle [30 min. rating] is designed for high performance and has a maximum torque of 3655 N∙m (373.0 kgf-m) with a maximum removal rate of 960 cm3/min (1.4 times higher than comparable VTLs.) เครื่องจักรที่ถูกออกแบบให้มีความสามารถรอบตัว และ มีประสิทธิภาพ ในการกัดชิ้นงานขนาดใหญ่ ที่เส่นผ่านศูนย์กลาง 920มม. X 800มม. และส่วนที่เพิ่มขึ้นมาก็คือ การเปลี่ยนมีดแบบอัตโนมัติที่แก้ปัญหามีดชน ในขณะที่ใช้ด้ามคว้านยาวบนป้อมมีดเพื่อให้สะดวกต่อการติดตั้งมีด และสามารถเพิ่มจำนวนการเก็บมีดได้มากขึ้น จึงทำให้เครื่องจักรสามารถรองรับงานได้หลากหลายตามความต้องการ ด้วยสปินเดิล 30 kW (40HP) [30 min. rating] ถูกออกแบบให้มีประสิทธิภาพและแรงบิดสูงสุดที่ 3655 N∙m (373.0 kgf-m) ด้วยความสามารถในการกลึงงานออกที่ 960 ลูกบาศก์เซนติเมตร/นาที (สูงกว่า 1.4 เท่า ของ VLTs.) ในเครื่องกลึงแนวตั้งทั่วไป